Applications

EDU.training - EDUCATION & MACHINE TOOLS INDUSTRY
A program for a professional technical schools and technical universities 

The problem
In recent years in Bulgarian machine engineering a problem appeared - absence of skilled workers
in the subject "NC-programming of CNC machine tools"
. The reasons for the beginning of the
problem are complex, but here are some of them:
 - Many specialists leave the country
 - The absence of adequate governmental policy in the education for almost 20 years: zero investments in material base, not updated syllabuses and absence of relation between business and education
 - Buying more and more machines with CNC, in consequence of machine engineering development during the last few years
 - Absence of serious investments from business side for education and for training the stuff

We, ESD Bulgaria, are convinced that the only way is effective using of modern and heavy duty CNC metal cutting machines, which can give a chance to Bulgarian machine engineers for competing the European and the World market. This fulfilled using of CNC metal cutting machines can be achieved only with high qualified specialists.

Do you know that fairly 50% of the potential of a metal cutting machine is NOT benefitted because of insufficie or bad trained staff!
The solution to build modern Centres for training in "NC-programming of CNC controls".

Training centre in Technical University - Sofia
In October 2008 in co-operation with the Department of Technology of Machine Building and Metal Cutting Machines we created our first Center for training in "NC-programming of CNC machines". It is situated in block 3, hall 3419 in Technical Univercity of Sofia. The training center was build with exceptional assistance of Professor, Doctor of Technical Sciences George Popov, Head of the department and with the inestimable help of associate proffesor doctor Peter Hadjiyski.
File with description of this application, you can download in Documents section.

Training centre in Professional Technical School "Jurij Gagarin" - Montana
In December 2008, we created Training room for "NC-programming of CNC machines" in Montana. The center disposes with PC workplaces, equipped with programming stations (simulators) of HEIDENHAIN TNC 320 control for milling centres and with MANUALplus control for lathe machines.
The Professional Technical School is equipted with two modernized, in 2008, machines: CNC lathe model CT 161 with HEIDENHAIN MANUAL plus control and with milling machine model Arsenal FV 325.02 with HEIDENHAIN TNC 320 control.
File with description of this application, you can download in Documents section.

Training centre in Professional Technical School - Varna
In December 2008, we created Training room for "NC-programming of CNC machines" in Varna. The center disposes with PC workplaces, equipped with programming stations (simulators) of HEIDENHAIN TNC 320 control for milling centers and with MANUALplus control for lathe machines.
The Professional Technical School is equipted with two modernized, in 2008, machines: CNC lathe model CT 161 with HEIDENHAIN MANUAL plus control and with milling machine model FV 325.02 with HEIDENHAIN TNC 320 control.
File with description of this application, you can download in Documents section.

Training centre in Professional Technical School "Ivan Rajnov" - Yambol
In December 2008, we created Training room for "NC-programming of CNC machines" in Yambol. The center disposes with PC workplaces, equipped with programming stations (simulators) of HEIDENHAIN iTNC 530 control for milling centres and with MANUALplus control for lathe machines.
Also the Professional Technical Schools is equipted with two modernized, in 2008, machines: universal lathe and universal milling machine with linear measuring systems and digital displays HEIDENHAIN ND 780.
File with description of this application, you can download in Documents section.

Training centre in Professional Technical School "Vasil Levski" - Kardzali
In the later spring 2010, we created Training room for "NC-programming of CNC machines" in Kardzali. The center disposes with PC workplaces, equipped with programming stations (simulators) of HEIDENHAIN TNC 320/TNC 620 control for milling centres and with MANUALplus 620 control for lathe machines. Also the Professional Technical School is equipted with two modernized, in 2010, machines: CNC lathe model CT 161 with HEIDENHAIN MANUALplus control and milling machine model Fehlmann Picomax 50 with HEIDENHAIN TNC 320 control. The Picomax machine is equipted with HEIDENHAIN sensors TS 220 and TT 140 for measurement of workpieces and cutting tools.
In cooperation with company SANDVIK Coromant we equipted these machines with different cutting tools.
File with description of this application, you can download in Documents section.

Training centre in Professional Technical School "May 9-th" - Cherven brjag
In the later spring 2010, we created Training room for "NC-programming of CNC machines" in Cherven brjag. The center disposes with PC workplaces, equipped with programming stations (simulators) of HEIDENHAIN iTNC 530 control for milling centres and with MANUALplus control for lathe machines.
Also the Professional Technical School is equipted with a new CNC lathe model Kovosvit MAS MT 32 CNC with HEIDENHAIN MANUALplus control system.
In cooperation with company SANDVIK Coromant we equipted machine MT 32 CNC with different cutting tools.
File with description of this application, you can download in Documents section.

Training centre in Professional Technical School "Dr. Nikola Vasiliadi" - Gabrovo
In the later spring 2010, we created Training room for "NC-programming of CNC machines" in Gabrovo. The center disposes with PC workplaces, equipped with programming stations (simulators) of HEIDENHAIN iTNC 530 control for milling centres and with MANUALplus control for lathe machines.
Also the Professional Technical School is equipted with a new CNC vertical machining center model Kovosvit MAS MCV 754 Quick with HEIDENHAIN iTNC 530 control system.
In cooperation with company SANDVIK Coromant we equipted machine MCV 754 Quick with different cutting tools.
File with description of this application, you can download in Documents section.


EDU.training - EDUCATION & MACHINE TOOLS INDUSTRY
presentation (Bulgarian version only, PDF file, 4.8 MB)

Renewable Energies
presentation (Bulgarian version only, PDF file, 4.6 MB)

Training centre in Technical University - Sofia
Brochure (Download brochure, Bulgarian version only, PDF file, 0.8 MB)
Recommendation (Download brochure, Bulgarian version only, PDF file, 0.8 MB)

Training centre in Professional Technical School "Jurij Gagarin" - Montana
Brochure
(Download brochure, Bulgarian version only, PDF file, 0.8 MB)
Recommendation (Download brochure, Bulgarian version only, PDF file, 0.8 MB)

Training centre in Professional Technical School - Varna
Brochure (Download brochure, Bulgarian version only, PDF file, 0.8 MB)
Recommendation (Download brochure, Bulgarian version only, PDF file, 0.8 MB)

Training centre in Professional Technical School "Ivan Rajnov" - Yambol
Recommendation (Download brochure, Bulgarian version only, PDF file, 0.8 MB)

Training centre in Professional Technical School "Vasil Levski" - Kardzali
Brochure (Download brochure, Bulgarian version only, PDF file, 0.8 MB)

Training centre in Professional Technical School "May 9-th" - Cherven brjag
Brochure (Download brochure, Bulgarian version only, PDF file, 0.8 MB)
Recommendation (Download brochure, Bulgarian version only, PDF file, 0.8 MB)

Training centre in Professional Technical School "Dr. Nikola Vasiliadi" - Gabrovo
Brochure (Download brochure, Bulgarian version only, PDF file, 0.8 MB)